Threaded Connects

Threaded Quick Connects: Pressure Tight, Instant Testing Solution at 100 Bar

The GWI-M Internal Threaded Quick Connect is used for high pressure testing up to 100 bar. The pressure-tight connection to standard as well as non-standard female threads is established within seconds.Traditional method of hand tightening is removed. No additional sealants needed for tightening. The easy handling creates significant time and cost saving.

Just press the lever of the connect, insert connect into the test piece, the pressure-tight connection is obtained within a second.

Operation Sequence (Pneumatic)

Insert the connect into the test piece.
Actuate the pilot pressure.
The test piece will get sealed with help of the connect.
Actuate the testing pressure.
Release the testing pressure after cycle completion.
Release the pilot pressure.
Remove the connect from the test piece.

Operation Sequence (Manual)

GWI-M Quick Connector is locked manually in the threaded test specimen by pressing the lever. By operating lever, threaded collet gets collapsed and connect can easily inserted into the test specimen.
Releasing the lever cause the threads to engage with mating threads of specimen.
The sealing is carried out with help of O-ring at the face of connect.
The system is filled or closed by means of air inlet plug.
After the test completion, the quick connect is released again by pressing the lever to collapse the collet and connect can be removed.

Product Information

Technical Data

Thread Size:
- Metric Threads: M10 X 1, M12X 1.5, M14X1.5, M16 X 1.5, M18 X1.5, M20 X1.5, M22X1.5, M24X1.5, M25 X 1
- BSP Threads: G1/8”, G1/4”, G3/8”, G1/2”, G3/4”
- NPT Threads: NPT1/8”, NPT 1/4”, NPT 3/8”, NPT 1/2”, NPT3/4”
- UNF/UNC Threads are available upon request.
Test pressure range: vacuum to 100 bar